GE ABS45DFBS Use And Care Manual

Also see for Artistry ABS45DFBS: Dimensions and installation information Installation instructions

GE ABS45DFBS Use And Care Manual Manual pdf 21 page image

Do not use a steel wool pad; it will scratch thesurface.To clean the stainless steel surface, use warm,sudsy water or a stainless steel cleaner orpolish. Always wipe the surface in the directionof the grain. Follow the cleaner instructions forcleaning the stainless steel surface.To inquire about purchasing stainless steelappliance cleaner or polish, or to find thelocation of a dealer nearest you, please call ourtoll-free number:National Parts Center 1.800.626.2002GEAppliances.comStainless Steel Surfaces (on some models)Be sure all controls are off and all surfaces are cool before cleaning any part of the range.If your range is removed for cleaning, servicing or any reason, besure the anti-tip device is reengaged properly when the range isreplaced. Failure to take this precaution could result in tipping ofthe range and can result in death or serious burns to children oradults.Control PanelIt’s a good idea to wipe the control panel after eachuse of the oven. Use a damp cloth to clean or rinse.For cleaning, use mild soap and water or a 50/50solution of vinegar and water. For rinsing, use cleanwater. Polish dry with a soft cloth.Do not use abrasive cleansers, strong liquid cleaners,plastic scouring pads or oven cleaners on the controlSDQHO³WKH\ZLOOGDPDJHWKHILQLVKPainted SurfacesPainted surfaces include the sides of the range andthe door, top of control panel and the drawer front.Clean these with soap and water or a vinegar andwater solution.Do not use commercial oven cleaners, cleaningpowders, steel wool or harsh abrasives on anypainted surface.How to Remove Protective Shipping Film and Packaging TapeCarefully grasp a corner of the protective shippingfilm with your fingers and slowly peel it from theappliance surface. Do not use any sharp items toremove the film. Remove all of the film before usingthe appliance for the first time.To ensure no damage is done to the finish of theproduct, the safest way to remove the adhesive frompackaging tape on new appliances is an applicationof a household liquid dish washing detergent. Applywith a soft cloth and allow to soak.NOTE: The adhesive must be removed from all parts.It cannot be removed if it is baked on.Control KnobsThe control knobs may be removed for easiercleaning.Make sure the knobs are in the OFF positions andpull them straight off the stems for cleaning.The knobs can be cleaned in a dishwasher or theymay also be washed with soap and water. Makesure the inside of the knobs are dry before replacing.Replace the knobs, in the OFF position to ensureproper placement.Porcelain Enamel Cooktop (on some models)The porcelain enamel finish is sturdy butbreakable if misused. This finish is acid-resistant. However, any acidic foods spilled(such as fruit juices, tomato or vinegar) shouldnot be permitted to remain on the finish.If acids spill on the cooktop while it is hot, usea dry paper towel or cloth to wipe it up rightaway. When the surface has cooled, wash withsoap and water. Rinse well.For other spills such as fat spattering, washwith soap and water or cleansing powdersafter the surface has cooled. Rinse well. Polishwith a dry cloth.Care and cleaning of the range. GEAppliances.comWARNING21