1Base Station1. Choose an area near an electrical outlet and a telephone walljack (RJ11C), and place your cordless telephone on a levelsurface, such as a desktop or tabletopNOTE: Model 27950 may also be wall mounted.. Plug one end of the telephone line cord into the TEL LINE jackon the base and the other end into a modular jack.. Plug the AC power adaptor into the electrical outlet and the DCconnector into the jack on the bottom/back of the base.CAUTION: To reduce risk of personal injury, fire, ordamage use only the 5-2757 power adaptor listed inthe user’s guide. This power adaptor is intended to becorrectly orientated in a vertical or floor mount position.Note: If you subscribe to DSL service through yourtelephone line you will need to connect a DSL filter betweenyour phone and the wall jack (refer to DSL Filter Installationsection for more detail).. Place the handset in the base cradle. The charge/in useindicator turns on, verifying the battery is charging.5. Allow the phone to charge for 1 hours prior to first use. Ifyou don’t properly charge the phone, battery performance iscompromised.Model 27951Model 27950
