USER MANUAL FORSX-3000 STANDALONE INTEGRATED MEDIA BLOCK™ WITHPORTABLE STORAGE/ ENTERPRISE STORAGESMS version 9.0April 20, 2015

GDC SX-3000 User Manual

INTRODUCTION

Equipment List

INSTALLING SX-3000 INTO THE PROJECTOR

Remove existing interface board/placeholders from projector

Christie Projector Placement

Inserting SX-3000 into the projector

INSTALLING PSD-3000-P PORTABLE STORAGE DEVICE

Front Panel

Installing the Bracket on a Barco S2K projector

Installing the Bracket on a NEC S2K projector

Installing the Bracket on a Barco B or C Series projector

Installing the Bracket on a NEC 2K or 4K projector

Installing the Bracket on a Christie CP2220 or CP2230 projector

eSATA Connection to the SX-3000

Procedure to Install the HDDs

PSD-3000-P Indicator

Warning Buzzer

OPERATION OF PSD-3000-P

Hard Disk Information

Increase Rebuild Speed

IMB Network Setup

Projector Connection

Barco Series 2 Projector Setup

Barco Touch Panel Setup

NEC Series 2 Projector

Christie Series 2 Projector

D settings for Series 2 projectors

IMB 3D macro settings changes

Time Zone Setup

Content Ingest Management Setup

Content ingest from FTP

Audio Setup

Digital-to-Analog Converters

AUTOMATION SETUP

Adding event labels and actions

Automation Scheduling

Automation setup for server GPIO

Automation setup for eCNA devices

Automation setup for JNIOR devices

Automation setup for Christie ACT devices

Automation setup for Dolby devices

Automation setup for USL DAX devices

Automation setup for USL JSD devices

SETUP

AES Audio and GPIO Pinout

SX-3000

GDC SX-3000 User Manual

Product

Learn More

Legal