XG Series User's Guide Chapter 5 Command ReferencePort Information Settings1215.1.1.31 backup standbyFunction Set the standby status of backup ports.Available Model XG0224 / XG0448 / XG2600Syntax backup standby Options• Backup group numberSet a backup group number with a decimal number.Set the standby status of backup ports.• onlineThe backup port in standby status does not go offline.• offlineThe backup port in standby status goes offline.Use Mode Configuration mode (admin class)Explanation Set the standby status of backup ports.If the standby state is specified to offline, the backup port in standby status goes offline.The offline port is in the same state as when the "offline" command for the Ethernet portcontrol is executed.If the currently operating backup port goes down, the offline port is released.The released port is switched unless it is still offline due to another function or has anerror.Caution• When the backup port selection method is set as a "master", backup priority port is notoffline even it is set to be offline in standby status.If the backup priority port must be offline, set the backup port selection method as"earlier".• When backup port is set to be offline in standby status, offline port cannot be releasedautomatically by any function other than backup port function. The same is true for theoffline port set by "offline" command.Default It is assumed that "online" has been specified as the standby status of backup ports.Range Model1 to 13 XG02241 to 26 XG04481 to 13 XG2600backup standby online
