Menu
Fujitsu Solaris PCI GigabitEthernet 3.0 User Manual
                                                                                                                   | |
Contents
|
Chapter 4 LinkAggregation Feature● The /etc/hostname.fjgiXX (XX: instance number) file is required for theaggregator-interface only (in the above example, /etc/hostname.fjgi1 is required).The LinkAggregation group defined in the configuration file is activated byrebooting the system.4.2.2 Using the /etc/opt/FJSVla/bin/fjla CommandThe fjla command has the following functions.● Activate a LinkAggregation Group (fjla init)● Inactivate LinkAggregation Group (fjla term)● Display status and statistics (fjla stat)4.2.2.1 Activate a LinkAggregation Group (fjla init)This section explains the fjla init command for activating a LinkAggregation group.- Synopsis/etc/opt/FJSVla/bin/fjla initaggregator-interface member-instance[:member-instance ]distribution-modeaggregator-interface : Aggregator-interface name (including instance number)member-instance : Instance numbers of member interfacesdistribution-mode : Distribution mode used by the LinkAggregation group. One of thefollowing values must be specified:1: Destination MAC address distribution2: Destination IP address distribution3: Source/Destination IP address distribution- DescriptionConfigure and activate the LinkAggregation group. All VLAN interfaces associated with theaggregator-interface will be automatically configured in the group.- Exit code0 : normal end.>0 : error end.- ExampleConfigure and activate the LinkAggregation group with the following:Aggregator-interface: fjgi0Member-instance: fjgi1 fjgi2Distribution-mode: Source/Destination IP address distribution52 |
Related manuals for Fujitsu PW008GE4
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved