Fujitsu ScanSnap N1800 Getting Started Manual

Also see for ScanSnap N1800: Brochure & specs Operating guide Software guide Operator's guide Software guide

Contents

6■ PrecautionsREAD ALL OF THIS DOCUMENT AND THEOPERATOR'S GUIDE CAREFULLY BEFORE USINGTHIS SCANNER. IF THIS SCANNER IS NOT USEDCORRECTLY, UNEXPECTED INJURY MAY BECAUSED TO USERS OR BYSTANDERS.Also, keep this document in a safe place so that it can beeasily referred to during use of this scanner.While all efforts have been made to ensure the accuracyof all information in this document, PFU assumes noliability to any party for any damage caused by errors oromissions or by statements of any kind in this document,its updates or supplements, whether such errors areomissions or statements resulting from negligence,accidents, or any other cause.PFU further assumes no liability arising from theapplication or use of any scanner or system describedherein; nor any liability for incidental or consequentialdamages arising from the use of this document. PFUdisclaims all warranties regarding the informationcontained herein, whether expressed, implied, orstatutory.Use of MercuryTo avoid unexpected injuries:z Do not put the substance contained in the lamp in yourmouth as it has mercury.z Do not breathe the chemical liquid contained in thescanner lamps.z Do not incinerate, crush, or shred the lamps orscanner parts.LCD Peculiaritiesz The LCD backlight is a fluorescent tube that containssome mercury.z Be aware that neither of the following is considered afault.- Despite the advanced technologies used to producethe devices TFT color LCD's, the large number ofpixels involved means that an occasional (always-on) bright dot or (always-off) dark dot may be visible.- The characteristics of the LCD mean that there maybe some variation in hue and intensity of colorsacross the screen.Replacing BatteriesIn order to retain data such as BIOS information, thisproduct has a battery (CMOS RAM battery) on board.Warning LabelThe scanner carries the warning label.Do not remove the warning label from the scanner. Avoidstaining the label, so that it is clearly visible.■ Disclaimer of LiabilityReproducibility of the Scanned ImageDataConfirm that the image data scanned with this productmeets your requirements (for example, imagereproducibility in size accuracy, fidelity, content, colors).Make sure that there are no missing parts in the scannedimage data before disposing of the original documentused for scanning.z Note that when there are sections marked with ahighlight pen, the color of the marked section may notbe accurately reproduced depending on the color anddensity, or may result in a different color tone from theoriginal.■ Regulatory InformationFCC DeclarationThis equipment has been tested and found to complywith the limits for a Class B digital device, pursuant toPart 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmfulinterference in a residential installation. This equipmentgenerates, uses, and can radiate radio frequency energyand, if not installed and used in accordance with theinstruction document, may cause harmful interference toradio communications.However, there is no guarantee that interference will notoccur in a particular installation. If this equipment doescause harmful interference to radio or televisionreception, which can be determined by turning theequipment off and on, the user is encouraged to try tocorrect the interference by one or more of thefollowing measures:z Reorient or relocate the receiving antenna.z Increase the separation between the equipment andreceiver.When carrying the scanner outside while it israining or snowing, pay special attention so thescanner does not get wet.When you perform cleaning, make sure that theinside of the scanner is free of any foreignobjects, and be careful not to get your hand orthe cloth caught on the pick spring (metal part) asa deformed pick spring (metal part) may causeinjury.Lamp(s) inside the scanner contain mercuryand must be recycled or disposed ofaccording to local, state, or federal laws.Hgz Do not replace the battery yourself,as there is a risk of explosion if thewrong type is used. Please contactyour maintenance engineer incharge when the battery runs low.z Do not touch the battery. Neverinstall or remove the battery byyourself. Doing so may causeelectric shock or static electricitywhich can damage the device.