Menu
Fujitsu SRS-12i User Manual
Also see for IP Centrex SRS-12i: Administrator's guideQuick reference card
                                              | |
Contents
|
3-3Fujitsu IP Centrex Telephone Telephone Set-up3Programming One-Touch (Option 1)Multifunction buttons can be set up to automatically dial numbers. (up to 30digits each).The numbers that can be programmed are any of the following:1. Standard telephone numbers, including the outside line access code(usually 9) if required.2. Special codes such as a personal ID number or a voice mail accesscode, including * and #.3. A combination of a standard telephone number plus one or morespecial codes, with pauses between the elements to allow for systemresponse time.To program a multifunction button for a One-Touch number, follow thesesteps:1. Press OPTIONS, numeric key “1”, then ENTER.The indicators for previously assigned one-touch buttons will be green.The indicators for buttons assigned to Directory Numbers, Call Appearance,and features will be red. The buttons with red indicators cannot beprogrammed for One-Touch dialing.2. Press the unassigned button desired to be used as a One-Touch button.The multifunction button’s number is at the far right of the second line. Inthis example, the button number is 16.3. To program a standard telephone number or a special code, press thekeypad digits for the number desired. Include the outside access code(such as 9) and area code for long distance. The digits show on thesecond line.To correct an error, press CLEAR to re-enter the number.Note:No pause is needed between the outside access code and the number to bedialed.ONE-TOUCHSELECT ASSIGN KEYENTER DIRECTORY NUMBERDN= (16)ENTER DIRECTORY NUMBERDN=912229876543 (16) |
Related manuals for Fujitsu IP Centrex SRS-12i
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved