Fujitsu RAID 0/1 SAS based on LSI MegaRAID User Manual

48 Modular RAID ControllersModular RAID 6Gb/s (SAS2.0)4.3.1 Features● Industry-proven MegaRAID ® data protection● Flexibility for both SAS 2.0 and SATA II● Advanced management and configuration suites● Supports RAID levels 0, 1, 1E, 5, 6, 10, 50 and 60● Optionally secured with BBU● Offers advanced MegaRAID functionality to integrated LSI SAS● 12 V PCIe add-in card● 8-lane 5.0 Gbit PCIe host bus● 8 SAS/SATA ports● Each SAS/SATA port supports SSP, SMP and STP● Support for the following STP features:– Addressing of SATA targets through expander– Native Command Queuing (NCQ)● Support of the following SSP features:– Wide port functionality (2 or 4 Phys from a single quad port)– Narrow port functionality (1 Phy)– Compatible with SATA target devices● 2 x SATA connectors for internal hard disk drives, 1 x SAS lane each● 1 x Midplane connector, 4 x SAS lanes● Hot-plug drives● SGPIO interfaces for signaling of SAS/SATA ports● Hardware XOR for RAID parity calculations● 72-bit wide 512 MB of DDR2 800 (with ECC)4.3.2 Controller versionsName Chip Cache No. of SAS channelsS26361-D3016-Ax LSI SAS2108 512 MB 2 for internal disk drives4 for Storage Blade Connection