Fujitsu Primergy BX600 Start Manual

Also see for PRIMERGY BX600: User guide User interface description Reference guide User manual

Contents

1��BX6001 Checking the itemssuppliedCheck the contents in the package usingthe "Contents List".If any items are missing, inform an office listed inthe "Contact Information".B7FH-4871-01EN-002 Reading and understand-ing "Safety Precautions"Before using this server, be sure to read and un-derstand the attached "Safety Precautions".Also check it when connecting, installing internal optionsand setting up this server.3 Checking location before installing the serverFor details on installing the rack, refer to the "Installation Guide for the RACK" and manuals provided with the rack.nConditionsWhen installing this server avoid the following areas.- Humid, dusty, or oily areas- Poorly ventilated areas- Areas close to fire or other sources of heat- Areas close to water- Areas close to direct sunlight or near heating appliances- Areas with a temperature of below 10°C or above 35°C- Areas with humidity of less than 20% or more than 80%- Salty areas- Areas where corrosive gas is generated- Areas where cables become trip hazards- Areas where strong magnetic fields are generated, such as near TVs and speakers- Areas where the device is not stable and could tip over and hurt somebody- In dusty areas, dust will quickly stick to the front and backside of the server. Since this can cause failure, changing theinstallation place is recommended.- Be sure to secure the rack with stabilizers to prevent the device from tipping over.n PRIMERGY BX600 ManualsManuals for this server can be accessed from the section below of the PRIMERGY Document & Tool CD.[CD-ROM Drive] :\MANUAL\INDEX.PDFManuals can be displayed using Acrobat® Reader® or Adobe® Reader®. If using Acrobat® Reader®, use version 5.0 or later.*This manual corresponds with BX600 S3 Blade Server System Unit and BX620 S4 Server Blade. For chassis and server blades not described inthis guide, refer to the corresponding manual on the Fujitsu PRIMERGY website (http://primergy.fujitsu.com).