77PRIMERGY RX200 S2 User’s Guide3 OS Installation Using ServerStart3 Click [Start].Installation starts.• When RAID has been configured, the system restarts.• If a message prompting you to insert the Service Pack CD-ROM appears, insert the CD-ROMand click [OK].This message does not appear when Service Pack is not selected.• If a message prompting you to insert the ServerView CD-ROM appears, insert thePRIMERGY Document & Tool CD (Disc 1) and click [OK]. This message does not appearwhen ServerView will not be installed or the PRIMERGY Document & Tool CD (Disc 1) hasbeen inserted already.• If a message prompting you to insert the ServerStart CD-ROM appears, insert the CD-ROMand click [OK].4 When a message prompting you to insert the OS CD-ROM appears, insert theCD-ROM and click [OK].After files are copied, a message prompting you to insert the ServerStart CD-ROM appears.5 Insert the ServerStart CD-ROM and click [OK].The License Agreement window appears.6 Click [I agree].After files are copied, a message prompting you to eject the CD-ROM and floppy disk appears.7 Eject the CD-ROM and floppy disk and click [OK].The system restarts. The system continues the installation operation after restart. OS GUI setup,LAN utility installation, Service Pack installation, and Active Directory installation areperformed automatically.8 When a confirmation message to restart appears, click [Restart].The system restarts and installs high reliability tools. Installation is performed automatically.9 When a message on installation completion appears, press any key.10 Restart the system.Click [Start] → [Shutdown]. Select [Restart] and click [OK]. The system restarts.11 When the system restarts, log on to the server using the Administrator accountfor the local computer.The server setup and OS installation have been completed. Refer to "Chapter 5 Operations after OSInstallation" (pg.127) and perform necessary procedures before starting server operations.
