Menu
Fujitsu MAU3147RC Product/maintenance Manual
Also see for MAU3036RC SERIES: Technical manual
                                                                                            |
Specifications2-2 C141-E2222.1.2 Function specificationsTable 2.2 shows the function specifications of the HDD.Table 2.2 Function specificationsSpecificationItem MAU3147RC MAU3073RC MAU3036RCFormatted capacity/device (*1) 147 GB (*2) 73.5 GB (*2) 36.7 GB (*2)Number of disks 4 2 1Number of heads 8 4 2Number of rotations min-1 (rpm) 15,000 ± 0.2 %Average latency time 2.0 msTrack to Track 0.2 ms / 0.4 msAverage 3.3 ms / 3.8 msSeek time (*3)(Read/Write)Full stroke 8.0 ms / 9.0 msStart/stop time(*4)Start timeStop time30 s typ. (60 s max.)30 s typ.Recording mode 60/63 MEEPRMLExternaldimensionsHeight:Width:Depth:25.4 mm101.6 mm146.0 mmWeight 0.8 kgPower consumption (*5) 11.5 WInterface SAS Cable length: 8 m maxAreal density 58 Gbit/inch2Disk drive 147 MB/sData transferrate (*6) SAS 1.5 Gbps, 3 GbpsLogical data block length 512 to 528 byte (Fixed length) (*7)Command specificationSAS (T10/1562D Rev. 05), SAS1.1 (T10/1601D Rev. 07),SAM-3 (T10/1561D Rev. 14), SAM-2 (T10/1157D Rev. 24),SPC-2 (T10/1236D Rev. 20), SBC (T10/996D Rev. 8c)Data buffer 16 MB FIFO ring buffer (*8)Acoustic noise (Idle) 3.5 Bels typ.(*1) The formatted capacity can be changed by changing the logical block length and using spare sectorspace. See Chapter 3 for the further information. The formatted capacity listed in the table is anestimate for 512 bytes per sector.(*2) 1 GB = 1,000,000,000 bytes |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved