Troubleshooting and tipsThe cursor does not correctly follow thepen movementsCause Fault eliminationPen incorrectly calibrated Windows XP► Calibrate the pen as shown under Tabletand Pen Settings in the Control Panel, see"Setting the pen", Page 36 and "Calibratingthe pen", Page 36.Windows 7► Calibrate the pen as shown under Hardwareand Sound / Tablet PC Settings in the ControlPanel, see "Setting the pen", Page 36 and"Calibrating the pen", Page 36.Pen input not workingCause TroubleshootingIncorrect driver installed. ► If your device is one which can only beoperated using the pen, install the driver forthe standard model.or► If your device is one which can beoperated using the pen and by finger,install the driver for the "Dual Digitizer"model.The notebook cannot be startedNotebookCause TroubleshootingThe battery is not installed correctly. ► Check whether the battery is installedcorrectly in its compartment.► Switch the notebook on.The battery is dead. ► Charge the battery.or► Insert a charged battery.or► Connect the mains adapter to thenotebook.The power adapter is not connected correctly. ► Check whether the mains adapter isconnected correctly to the notebook.► Switch the notebook on.118 Fujitsu Technology Solutions