Menu
Fujitsu KM010 User Manual
    |
Wireless laser mouseUser’s Manual1. Contentsz 2.4GHz Laser Mousez Micro Donglez Two AAA Batteriesz Mouse Driver CDz User’s Manual2. The RF mouse overview(1) Micro Dongle (7) Connect button(2) Left Key (8) Power ON/OFF(3) Right Key (9) Laser LED(4) Roller Key(5) Backward (B4)(6) Forward (B5)3. Hardware Installationz Installing Batteries:Remove the battery cover from the bottom case and put 2 AAA batteries into battery compartment.z Pairing the Micro Dongle (Receiver) to the ComputerPlug the Micro dongle into any available USB port on your computer and an indication of identifying newUSB device will appear on the Screen●Pairing the receiver and mouseTurn on the mouse power, keep the mouse close to the receiver andwait for at least 5 seconds. For the 1 st pairing, the Green LED ofmouse turns on when pairing begins. After pairing successful, theGreen Led turns off automatically and an indication of new inputdevice will appear. The user can now start to enjoy the RF mouse. Note: If the Mouse is not first time use and hadbeen “Turn Off” the power under different Resolution, when you “Turn ON” the power again, then it will appearthe last memory resolution LED light.5 seconds Bottom Green LED “On” “Off”4. Driver Installation (Notice: The driver supports Windows 2000 XP and Vista)Installation of driver CD will be done automatically once the CD is plugged in and recognized. In case it doesn’twork, please try steps below:z Insert the driver CD |
Related manuals for Fujitsu KM010
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved