Menu
Fujitsu GW1500 Getting Started Manual
                                              |
GW1500 Getting Started Guide16 Chapter 1 OverviewDetails on the lamps are shown below.The STATUS lamp and the SERVICE lamp turn on to red or amber immediatelyafter the device is activated, but this is not a malfunction. The STATUS lampblinks green and then turned on. This indicates that the device is activatedproperly. If the STATUS lamp does not change to green after five minutes, thereLampNameLampColor Status Display Conditions RemarksSTATUS- Off Indicates that the power is not turned on. -Green On Indicates that the device is operatingnormally. -RedBlinking Indicates that the device is being reset tothe factory default settings.Blinkssimultaneouslywith theSERVICElamp.On Indicates that an error occurred in thedevice. -Amber On Indicates the software status.Check thesystem log forthe status.SERVICE- Off Indicates that the device is not connectedto the center. -GreenBlinking Indicates that the device is acquiringconfiguration definitions from the center. -On Indicates that the configuration definitionshave been reflected. -RedBlinking Indicates that the device is being reset tothe factory default settings.Blinkssimultaneouslywith theSTATUS lamp.On Indicates that the IP address is beinginitialized. -SECURE- Off Indicates that the SSL-VPN connection orprivate PPP connection is not established. -BlueBlinkingSSL-VPN connection or private PPPconnection (download connectionunavailable)-OnSSL-VPN connection or private PPPconnection (two-way communicationavailable)- |
Related manuals for Fujitsu GW1500
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved