Fujitsu FTP-631MCL351 Specification Sheet

Contents

general specifications

FTP-631MCL351/352n OVERVIEWThis thermal printer (driven by VDC 24) and cutter provide highspeed printing for 3- inch wide paper (85 mm). This printer is small insize, light weight, and has low power consumption. The print head isdesined with open construction for easy maintenance.This printer is suitable for the variety of applications, such as POSterminals, ticket machines, label printers, measuring devices andmedical equipment.In addition to the interface board, a driving LSI (MCU + Gate Array) isalso available.n HIGHLIGHTS• Ultra high speed printingIt can print at 100 mm/s (800 dotlines/s) by using FujitsuComponents' unique head drive control system.• Auto cutterFull or partial cutting are available by normal or reverse rotation ofthe motor (command set).• Low power consumptionThe peak current for head driving is approximately 2.6 A (at 50mm/s printing speed, 50% printing ratio).• Easy head accessHead-open construction makes head maintenance easy,especially for head cleaning.• Paper auto loading functionThe thermal paper can be loaded without head-up leveroperation.• High resolution8 dots/mm head provides clear print output.• Selectable paper pathsFront or rear insertion types are available.24V DRIVE, ULTRA HIGH SPEED LINE THERMAL PRINTER3” MECHANISM, WITH AVAILABLE CUTTERFTP-631MCL351/352 shown afterassembly with FTP-631CT001cutterFTP-621DCL013FTP-621CU102, FTP-633GA1011