Fujitsu FBR12 Specification Sheet

Contents

specifications

(a) Series Name FBR12 : FBR12 Series(b) Enclosure & Coil Power N : Standard (plastic sealed type)W : High dielectric strength type (plastic sealed type)H : High sensitivity type(c) Coil Type D : DC coil(d) Nominal Voltage Refer to the COIL DATA CHART(e) Contact Material Nil : Gold-overlay silver-nickel–P : Gold-overlay silver-palladium(f) Custom Designation To be assigned custom specification(g) CSA Standard –CSA : UL114 + CSA recognized–CSA : UL1950 + CSA (under application)Note: The designation name is stamped on the top of the relay case as follows:(Example) Designation ordered: FBR12ND05Stamp: 12ND05n FEATURESl Super miniature size: 0.2 inch × 0.1 inch grid, 12 pin DIPUp to 50% less volume and board area than previousgeneration telecom relay.l Slim type for high density mountingl Conforms to Bellcore TR-NWT-001089 and FCC Part 68requirementsl UL recognized and CSA certifiedl Low power consumptionl Conforms to IEC 950 (W type only)– 2.5 mm clearance and creepage between coil and contacts–5000 V surge strength between coil and contacts (2x10μssurge wave)–2000 Vrms dielectric strength between coil and contacts–UL 1950 and IEC950 (approval in process)FBR12 N D 12 –P –** (–CSA)[Example] (a) (b) (c) (d) (e) (f ) (g)FBR12 SERIESMINIATURE RELAY2 POLES—1 to 2 A (FOR SIGNAL SWITCHING)n ORDERING INFORMATION1n SAFETY STANDARD AND FILE NUMBERSNominal coil voltage Contact rating0.5 A 125 VDC resistive3 to 24 VDC 2 A 30 VDC resistive0.3 A 110 VAC resistiveUL508, 1950, 114 (File No. E63615)C22.2 No. 0, No. 14 (File No. LR40304 or LR64026)DISCONTINUED (2002)