Copyright Fujitsu Technology Solutions, Release June 2009ETERNUS DX60 and DX80Product IntroductionCopyright Fujitsu Technology Solutions, Release June 20091Product Introduction ETERNUS DX60 and DX80HighlightsHighlights Low environmental impact Highly scalable & versatile connectivity User friendly management systems Outstanding reliability

Fujitsu Eternus DX60 Product Introduction

naming conventions

Chapter 1 Workflow

Chapter 2 Checking the Server Environment

VERITAS Cluster Server (VCS)

Chapter 3 Notes

Fibre Channel Card Notes

VERITAS Volume Manager (VxVM) Notes

Chapter 4 Installing and Setting Up ETERNUSmgr

Chapter 5 Setting Up the ETERNUS DX Disk Storage System

Chapter 6 Setting Up the Fibre Channel Switches

Chapter 7 Installing Drivers and Setting Up the Server

Chapter 8 Connecting the Server to the ETERNUS DX Disk Storage Systems

Chapter 9 Setting Up the Server to Recognize the Logical Units

For SUSE Linux Enterprise Server

Chapter 10 Setting Up and Checking the Multipath Driver

Chapter 11 Setting a File System

Manager Environment

ETERNUS DX60

For VMware Infrastructure 3

ETERNUS DX Disk Storage System Setup Notes

Jumbo Frame Setting Notes

Chapter 6 Setting Up the VMware ESX Server

Checking the LAN Cards

Creating the Virtual Switches

Setting the Software Initiator

Enabling ALUA

Checking the LUNs

Setting CHAP Authentication

Plug-in Settings

Turning on the Devices

Chapter 7 Virtual Machine

Applying Required Patches

Chapter 8 Dynamic Recognition of LUNs Added While VMware ESX is in Use

LVM Notes

Chapter 4 Checking the Server Information

Chapter 5 Setting Up the ETERNUS DX

Chapter 6 Installing the iSCSI Software Initiator and Setting Up the Server

Setting Up the Server

Maximum Number of Volume Group Settings

Server Settings when CHAP Authentication is Used

Server Settings when Bidirectional CHAP Authentication is Used

Chapter 7 Checking Connections

Multipath Configuration using PV-Links

Multipath Configuration using Native Multipath

Enabling ALUA (alua_enabled)

chapter 1 overview

system configuration

flow from installation to operation

chapter 3 configuration

Test

Chapter 4 Operation

Group

Provisioning

Management

performance management

Types

Intervals

Information

Condition

copy table size settings

Copy

Operation

Monitoring

nas management

Features

System

Environment

Volume

Snapshot

Stop/Start

operating environment

Configuration

Server

installation steps

Interface

Method

Folder

Name

Sharing

Snapshot Reference

Capture

Pool

chapter 5 maintenance

5.1.2 Restoring Express's Manager Environment

5.1.3 Changing Express's Manager Environment

5.1.3.2 Changing IP Address

5.2 Maintenance of Express's Manager Environment

5.2.2 Restoring Express's Manager Environment

5.2.3 Changing Express's Manager Environment

5.2.3.2 Changing IP Address

Stopped

Function

A.3.1 How SnapOPC+ Eorks

A.3.2 Restore

A.3.4 SDP operation

Express

B.1 storageadm perfdata (Performance Information Management

B.2 esfsnap (Express's Manager Troubleshooting Information Collection

Index

setup preparation

power cords

configuration wizard

data backup

about this manual

additional information

related manuals

Chapter 1 Overview

RAID Groups and Volumes

System Disks

Hot Spare

Disks

Functions

Redundant Copy

Advanced Copy

RAID Migration

Figure 1.14 Example for use RAID Migration 2

Logical Device Expansion

LUN Concatenation

Security Functions

Figure 1.18 Host Affinity function

Eco-mode

Front View

Rear View

Figure 2.10 Power supply unit (3.5" type controller enclosure)

Type Controller Enclosure

Figure 2.12 Front view of 2.5" type controller enclosure (without flange cover)

Figure 2.14 Rear view of 2.5" type controller enclosure (single controller model)

Figure 2.16 ETERNUS DX60/DX80 Fibre Channel model controller

Figure 2.17 ETERNUS DX90 Fibre Channel model controller

Figure 2.18 Power supply unit (2.5" type controller enclosure)

Type Drive Enclosure

Figure 2.20 Front view of 3.5" type drive enclosure (without front cover)

Figure 2.22 Rear view of 3.5" type drive enclosure (single expander model)

Figure 2.24 Expander (3.5" type drive enclosure)

Figure 2.27 Front view of 2.5" type drive enclosure (without flange cover)

Figure 2.29 Rear view of 2.5" type drive enclosure (single expander model)

Figure 2.31 Expander (2.5" type drive enclosure)

AC Outlet Box

Chapter 3 Standard Operations

Power OFF Control

Attaching and Removing the Front Cover

Attaching and Removing the Flange Cover

Turning the AUTO POWER Switch On/Off

Wearing the Wrist Strap

Chapter 4 Flow from Installation to Operation

Chapter 5 Installation

Check the Number of Wall Outlets

Rack Installation

Installing Controller Enclosure

Installing Drive Enclosure

Installing AC Outlet Box (1U)

Installing AC Outlet Box (2U)

Chapter 6 Cable Connection

LAN Cable Connection (for Operation Management)

Fibre Channel Cable Connection (For Fibre Channel)

LAN Cable Connection (For iSCSI)

MiniSAS Cable Connection (For SAS)

MiniSAS Cable Connection (For Drive Enclosures)

Figure 6.1 MiniSAS cable connection (between the controller enclosure and drive enclosure single controller model)

Figure 6.3 MiniSAS cable connection (When two or more drive enclosures are added single controller model)

Power Cord Connection

With No AC Outlet Box

When 1U AC Outlet Box is Installed

Table 6.1 Connection path of a power cord (AC output cable) (AC outlet box (1U))

Figure 6.5 Connection of AC output cables (1U AC outlet box)

When 2U AC Outlet Box is Installed

Table 6.2 Connection path of a power cord (AC output cable) (AC outlet box (2U))

Figure 6.6 Connection of AC output cables (2U AC outlet box)

Setup Preparation

Basic Setup

Initial Setup

Figure 7.2 Start screen of the [Initial Setup] function

Figure 7.3 [Set Date and Time] screen

Figure 7.4 [Set Storage System Name] screen

Figure 7.6 [Modify FC Port Mode] screen

Figure 7.7 [Set FC Port Parameters] screen (for the "FC-CA" Port Mode)

Figure 7.8 [Set iSCSI Port Parameters] screen

Figure 7.9 [Set SAS Port Parameters] screen

Figure 7.10 [Setup Network Environment] screen

Configuration Wizard

Figure 7.12 Configuration Wizard initial screen

Figure 7.13 [Create RAID Group] screen

Figure 7.14 [Create Volume] screen

Figure 7.15 [Setup FC Host] screen

Figure 7.16 [Setup iSCSI Host] screen

Figure 7.17 [Setup SAS Host] screen

Figure 7.18 [Configure Affinity Group] screen

Figure 7.19 [Define LUN Mapping] screen 1 (when the Host Affinity function is used)

Figure 7.21 [Define LUN Mapping] screen 1 (when the Host Affinity function is not used)

Fujitsu Eternus DX60 Product Introduction

Product

Learn More

Legal