Menu
Fujitsu Eclipse AVN52D Installation Manual
                |
- 7 -Wire colors and connection points for connection wires , and 432Never connect the power supply to the speaker wires (No.7 and No.8),otherwise it will cause damage to the main unit.CautionB+ (Yellow)Connect where power is constantly available, regardless of the ignition key's position.ACC (Red)Connect where the power comes on when the ignition is in the ACC position.Illumination power supply (Orange/White)Connect to where power comes on when the vehicle light switch is turned on.Cellular phone mute wire (Pink)If you use a cellular telephone, connect it via the Audio Mute lead on the cellular telephone.If not, keep the Audio Mute lead free of any connections.Antenna power supply (Blue)Connect to the automatic-antenna control terminal of the vehicle.Control power supply (Blue/White)Connect to the control terminal for the external amplifier, etc.Front speaker output wiresConnect to the front speakers. White: Left + White/Black: Left -Gray: Right + Gray/Black: Right -Rear speaker output wiresConnect to the rear speakers. Green: Left + Green/Black: Left -Purple: Right + Purple/Black: Right -Ground (Black)Connect where good body grounding is available.Vehicle speed pulse signal wire (Purple/White)Connect to the vehicle speed pulse signal terminal.Parking brake signal wire (Red/White)Connect to the parking brake signal terminal.Reverse signal wire (Green)Connect the reverse signal output of the vehicle to this terminal.Front line-out terminalsConnect to the RCA connector of an external amplifier.Rear line-out terminalsConnect to the RCA connector of an external amplifier.Line-out terminals (Sub-woofer)This is used for non fader output. It can be used as a sub-woofer terminal if a separate amplifier witha low bass filter is connected.121110987654321Español Français Italiano Nederlands SvenskaEnglishDEC |
Related manuals for Fujitsu Eclipse AVN52D
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved