Fujitsu ETERNUS DX80 S2 User Manual

Also see for Eternus DX80 S2: User guide User guide Configuration guide Configuration guide Configuration guide

Contents

Chapter 4 Operations4.2 Monitoring ETERNUS DX Disk Storage System StatusETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Operation-Copyright 2013 FUJITSU LIMITED P3AM-4842-12ENZ0614.2.2 Displaying Status via ETERNUS Web GUIThe status of the ETERNUS DX Disk storage system and the usage status of RAID groups, TPPs, and SDPs can bechecked in the Overview screen of ETERNUS Web GUI.Figure 4.3 ETERNUS Web GUI screenTable 4.1 shows the general status.Status of each component in the ETERNUS DX Disk storage system is monitored periodically, and the result isdisplayed as a general status image with character strings.Table 4.1 General status of ETERNUS Web GUIRefer to "ETERNUS Web GUI User’s Guide" for details.General status ETERNUS DX Disk storage system statusNormal (Green)The ETERNUS DX Disk storage system is in normal state.Not Ready (Red)"Not Ready" is a status where an abnormality is detected at a power-off,and I/O access from the server cannot be received.Error (Red)The ETERNUS DX Disk storage system is in error state.Maintenance (Orange)The ETERNUS DX Disk storage system is under maintenance.Warning (Yellow)The ETERNUS DX Disk storage system is in warning state.