209OthersXVOthersConnecting portable audio players to the AUX jackUse a commonly available accessory cord with the RCA connector toconnect a portable audio player to the AUX (auxiliary) jack of this system.The deck is compatible with portable audio players with both analogoutput and digital output (44.1 kHz and 48 kHz).Turn on the portable audio player and start its playfunction.Switch to AUX mode by pressing the [DISC] button formore than one second.Activation of the AUX mode will light the "AUX" indicator andchannel audio player output to the system speakers.● While the AUX mode is activated, actions such as turning off theaudio player or pulling out the connection cord may cause noisespikes that can damage the system speakers. Be sure to avoidthis possibility by turning off system power or switching fromAUX mode to another mode before shutting off or disconnectingthe portable audio player.● Audio output levels will differ for the various devices that can beconnected by this method. Carefully adjust volume until theoutput level of the connected player is known.● Before using a portable audio player in a vehicle, read theplayer's operation manual carefully and confirm problem-freeoperation in the vehicle before proceeding.[DISC] button
