Menu
Fujitsu DX100 S3 Setup Manual
Also see for ETERNUS DX100 S3: Configuration guideSafety precautionsConfiguration guideConfiguration guideUser guide
              |
Setup GuideSetup GuideFUJITSU StorageETERNUS DX100 S3/DX200 S3 Hybrid Storage SystemsP3AM-7852-06ENZ0An installation space and network environment must be prepared in advance.Prepare the following manuals:● Manuals for the ETERNUS DX100 S3/DX200 S3● Related manuals, such as manuals for the server or the networking equipment that is usedInstallation SpaceSite Planning GuideNetwork Environment• Configuration Guide (Basic)• Configuration Guide (Web GUI)PreparationSTEPInstallation spaceCheck that the installation area meets the space requirements of the rack in which the ETERNUS DX is to beinstalled.Environmental considerations for installationCheck if the installation area for the ETERNUS DX meets the environmental conditions and installation environmentconditions.Power outletsCheck the type and the number of power outlets/sockets that are required to install the ETERNUS DX.Completing and attaching the Network Settings labelWrite down the IP address for the ETERNUS DX on the Network Settings label and attach it inside the rack.Settings for the PC● Set up the network environment- IP address : 192.168.1.2- Subnet mask : 255.255.255.0● Set the Web browserRefer to "Configuration Guide (Web GUI)" for details on the settings that are required. |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved