Fujitsu Brocade 6545 Gen5 Hardware Reference Manual

Contents

30 Brocade Gen5 6545 16-Gbps FC Switch Module Hardware Reference Manual53-1003184-01Changing from Fabric OS Native to Access Gateway mode3NOTEIt is recommended that you save the current configuration file before converting the SwitchModule to Access Gateway mode. To save your current configuration, click the Show AdvancedMode button in the top right-hand corner of the Switch Administration window. Select theConfigure tab, then select the Upload/Download tab. Enter the relevant information to uploadthe configuration file.5. From the Switch Status section, click Disable.6. From the Access Gateway Mode section, click Enable.7. Click Apply.8. When prompted, click Yes to restart the Switch Module in Access Gateway mode.The current Web Tools session closes; relaunch Web Tools after the Switch Module reboots.