Menu
Fujitsu AVN 6000 Installation Manual
                |
Remove the pocket and any other accessoriesfrom the centre cluster to make room for the mainunit.1Remove the mounting brackets for the pocket.2Attach the brackets to the main unit.3Install the main unit in the vehicle.4Be careful not to forcefully push on the main unit'sdisplay or buttons during installation. This mayresult in damage to the main unit.TipBe sure to use the supplied accessory mountingscrews (Red: M5 x 8) as the mounting screws. Ifany other screws are used, they may damage theinside of the main unit.Tip- 16 -Installing the main unitInstalling the main unit30˚ or lessLevel (reference)Front- Installation angle -To maintain proper function, the main unit must bemounted at an angle of less than 30 degrees. If theangle is in excess of 30 degrees, DVD/CD skippingand improper DVD/CD ejection may occur.TipMounting boltsPocket, etcCentre cluster panelMain unitMounting bracketHex-head bolt(Red:M5 x 8) x 8Hex-head bolt(Red:M5 x 8) x 8Flat headscrew(Red:M5x8) x 8Select the screws in accordance with the shapesof the screw holes in the mounting bracket.8 981- Mounting the main unit -•• Carefully bind any excess length of wire thatis connected to the main unit and secure itto an area of empty space in the vehicle sothat it does not dislodge or interfere with themain unit or vehicle-side equipment. If thewires are not handled correctly, operatingproblems or short-circuits may occur, andthis may result in the danger of fire or otheraccidents.•• Connect all wires before installing the mainunit.Tip090003-290607000602DE (CN) |
Related manuals for Fujitsu AVN6000
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved