Fujitsu ARROWS NX F-01K Instruction Manual

Contents

Settings1304 Set each itemTap [Select mode] to select the communication modefor Multi-connection.When a Wi-Fi network is registered in [Frequently usedhotspot], the terminal preferentially use the Wi-Fi whenyou are connected to the registered Wi-Fi network.❖About applications compatible withMulti-connectionThe applications displayed by tapping [Select application] arethe Multi-connection targets.✔INFORMATIONWhen the running application is selected in [Selectapplication], enabling the setting may take time.To enable the setting immediately, end the runningapplication and restart the terminal.Some functions may be restricted when using Wi-Fi for thesite that distinguishes network connection (d(dmenu) Items in "My docomo ( )" (Mydocomo (customer support)) etc.). In that case, turn Wi-Fi toOff before use.Multi-connection cannot be used in the following cases.- In Airplane mode- During international roaming- Tethering in use- Connected to VPN- VPN in connectionIf the Wi-Fi network registered in [Frequently used hotspot]behaves erratically, some applications that usually restrictcommunications to Wi-Fi may temporarily switch over topacket communications (LTE/3G).When Multi-connection is set to OFF, high-speed downloadalso turns OFF.If data amount exceeds the limit of subscribed budget planand transmission speed is limited, Multi-connection does notwork.Wi-Fi Auto ON/OFFTurn Wi-Fi function to ON/OFF automatically by using theinformation from the mobile network base stationSet whether to turn the Wi-Fi function to ON automaticallywhen the terminal detects the area where you have connectedto Wi-Fi, or turn it to OFF automatically when the terminaldetects an area where you have not connected to Wi-Fi.1 From the Home screen, [Settings][Wireless & networks] [Wi-Fi]2 [MENU] [Advanced] Mark/Unmark [Wi-FiAuto ON/OFF]✔INFORMATIONThe area where you have connected to an access point for 2minutes or more consecutively with the function ON can bedetected as an area where you have connected to Wi-Fi.This function does not operate when the Airplane mode orWi-Fi tethering is ON.If Wi-Fi area information is changed etc., the terminal may notbe connected automatically with this function. In that case,connect manually.