Fujitsu AIRSTAGE UTY-ASGXZ1 Operating Manual

4. Data acquisition application right click menu38 Copyright© 2009-2017 Fujitsu General Limited. All rights reserved.Unit operationGo to the unit location and start the unit operation with a remote controller. The unitsstarted will be listed in the order they are started on this list and will be numbered inthat order.For the indoor units already allocated a No., No. cannot be updated even byexecuting this operation. When No. must be reallocated, execute it after clearingthe No.( )NoteSelecting unitsWhen units are recognized and numbered, double click on the unit. The name registra-tion dialog box will appear.Naming unitsEnter the name for the unit and click “OK”.Stop registrationClick “Stop” when finished with the registration.When the operation was executed, always end registration by this operation.If this operation was not performed, the indoor unit will not operate properlythereafter. (Indoor unit fan will not operate.)NoteEnd registrationClick “Close” to end manual setting registration.Clear buttonClear the No. ( ) of an arbitrarily selected indoor unit. When indoor unit was clearedby this operation, the indoor unit can be operated at .Instead of registering names for each start operation, you may operate all theunits and name all the units at once after stopping registration.Note