Menu
Fujitsu 5GRUDB3 User Manual
                                                                                                               |
4.5RU InstallationIn this section:4.5.1 Installation Prerequisites4.5.2 Attach L-Brackets and Eye Bolts4.5.3 Attach RU Mounting Adapter Plate4.5.4 Attach RU to Pole4.5.5 Attach RU to WallThe following procedures describe how to install the RU.Note: All hardware is stainless steel that will not corrode.Note: Use care when handling the RU, as it is heavy. Fujitsu recommends installing the RU on a two-person teamto avoid damage to the unit or injury to the user. If the RU is to be installed at a high location, Fujitsurecommends using lifting equipment to hoist the RU by a pair of eye bolts mounted on the RU.4.5.1Installation PrerequisitesInstallation requires the following basic tools and accessories:■ Power cable■ Optical cable■ RF cables■ RET cable■ Frame ground cable■ SFP■ Torque wrench■ Torx® screwdriver■ Metric and SAE toolkit■ Screw drivers■ Wire strippersInstallationRU Installation95Release 1.0 · Issue 1.1, May 2021 Fujitsu and Fujitsu Customer Use Only |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved