Fujitsu 560H SERIES Specifications

Contents

specifications

1Dimensions are in millimeters (inches) www.fcai.fujitsu.comSpecificationssubject to changeMEMORY CARD CONNECTORS(PCMCIA CONFORMABLE)560H SERIESn FEATURES• The connectors conform to the Japan Electronic IndustryDevelopment Association (JEIDA) and PersonalComputer Memory Card International Association(PCMCIA) standards Ver. 4.• Contact pitch of 1.27 mm (0.050 in.) x 1.27 mm (0.050 in.).Incorrect insertion is prevented. Hot system plugging ispossible (contact detection).• Plugs have an easy-to-use ejection mechanism.• Raised mounting type connectors (under whichcomponents can be mounted) and low-profile connectorsare available.• In addition to connectors for type I and type II cards, aconnector for type III cards has been provided.• The sockets are of the SMT type. A straddle-type socket for double-sided mounting and a socket for single-sidedmounting are available.n PIN CONNECTOR (PLUG) CONTACT LENGTHn SPECIFICATIONSItemOperating temperature rangeCurrent ratingVoltage ratingContact resistanceInsulation resistanceDielectric withstanding voltageInsertion/withdrawal lifeSpecification– 55°C to + 85°CDC 0.5 AAC 250 V40 mΩ max (6 VDC, 0.1 A)1000 MΩ min. (500 VDC)500 VAC for 1 minuteIndustrial environment: 5,000 timesOffice environment: 10,000 timesContact typePower, ground pinsCard detection pinsOther signal pinsPin No.1, 17, 34, 35, 51, 6836, 67OthersContact length5.0 mm (0.196 in.)3.5 mm (0.137 in.)4.25 mm (0.167 in.)n MATERIALSPlug body: PPS resin UL94V-0: 6T nylon (for type III card connector) UL94V-0Ejector: Polyester: PPS resin (for SMT and type III card connectors)Copper alloyContact: Gold over palladium over nickel(PAGOS)Terminal: PalladiumSpecificationItemInsulating materialConductorPlating