Menu
Federal LPRSS Series Installation & Operation Instructions
                                        | |
Contents
| 
Page 28 of 40(14) CLEANING INSTRUCTIONS14.1 DAILY CLEANINGThe case should be cleaned thoroughly, as described in the weekly cleaning section, before it is used for thefirst time.NOTICE:Avoid splashing or soaking any electrical components with water to prevent electricaldamage to the case.NOTICE:Shut off lights and power switches and remove all product from case. Allow sufficient timefor the unit to reach room temperature before proceeding with cleaning.NOTICE:Remove all product from case before proceeding with cleaning procedure.NOTICE:Acrylic end panels and top panel require special washing procedures to prevent hazing andyellowing of material. Read cleaning of end panel and top panel procedure carefully.NOTICE:This case is not designed to be cleaned by flushing.Note: For major spills or foreign material buildup perform the weekly cleaning instructions.1. (If Supplied With Optional Rear Doors.) Clean all foreign materials from the door opening and cleanboth sides of the doors with a damp cloth2. Wipe complete interior and exterior of case using a damp cloth.3. Clean both sides of end glass panels using any common window cleaner.14.2 WEEKLY CLEANINGThis procedure is recommended on a weekly basis. It may need to be performed more often if necessaryto maintain a clean, sanitary case. The case should be cleaned to this procedure before using the first time.NOTICE:Avoid splashing or soaking any electrical components with water to prevent electricaldamage to the case.NOTICE:Shut off lights and power switches and remove all product from case. Allow sufficient timefor the unit to reach room temperature before proceeding with cleaning. |
Related manuals for Federal ELPRSS Series
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved