ELITE XT - HOW TO INCREASE CLAMPING FORCEINSTRUCTIONS2) from oil or lubricants.Remove clamp from guides if necessary.Clamp works optimally with VERY little amountof oil. Use solvent for cleaning if necessary.CLEAN GUIDE RODS3) from oiland lubricants. Clamp works the best with none or VERY littleamount of oil. Use solvent if necessary.CLEAN BOTH LOCKING UNITS (inside the clamp)4) ATTACH SUPPORT ROD and fasten screws.Area to be cleaned isshown here: precisionhole.1) REMOVE SUPPORT rod. Open to screws with hexagonal key.(Inside the clamp)Locking unitPage 1 of 3 www.maping.comPREPARATIONSCLEANINGCLEANINGRE-ASSEMBLYRE-ASSEMBLY

Fastbind ELITE XT Instructions Manual

Product

Learn More

Legal