Menu
Fastbind C400 User Manual
  |
Manual creasing machineFASTBIND C400Manufacturer of Fastbind binding machinesManufacturer:Maping CoAtomitie 5F, 00370 Helsinki, Finlandtel: +358 9 562 6022fax: +358 9 562 6215e-mail: support@maping.comhttp://www.maping.com5.8. Move handle (3) down.5.9.Move the sheet and align it agains the lower part of guide 5Â.5.10.Perform next creasing.5.11.Move handle (3) up.5.12. Repeat the steps 5.7-5.11 with guide 5A.(fig. 3).Your creasing machine is designed to work for a long time.Creasing machine does not require professional maintenance and greasing.To adjust the gap between the creasing blade and the table use nuts Ì10 at the bottomof the table (1).To adjust the gap between the creasing blade and the table at th e central part of theblade use screw M8 at the bottom of the table (1) between the nuts Ì10.5. MaintenanceIMPORTANT!Do not release four M5 nuts marked with red paint.Your creasing machine will serve longer if you move the handle (3) into upperposition after the work is finished.Ì10Ì8Ì5Ì5Ì5Ì5Ì10fig. 3USER'S MANUAL |
Related manuals for Fastbind C400
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved