Fast Mover FT1010 Instruction Manual

Contents

Fast Mover FT1010 Instruction Manual Manual pdf 2 page image

Tool UseThis Air Operated Dual Action Sander isdesigned for the purpose of sanding avariety of coatings from steel, wood,plastics, etc.FT1010Instruction ManualFast Mover ToolsT: 01582 661993 F: 01582 667100 E: sales@fastmovertoolsuk.comwww.fastmovertoolsuk.comIMPORTANTPlease read through this Manual carefully before using the FT1010.This tool must only be used for sanding and within the parametersoutlined in this manual. All users of the equipment should be trained inany risks associated with the products they are sanding or using asfinishing aids.SpecificationPad Diameter 6”/150mm Orbit 3 or 5mmPad Thread Size 5/16”Free Speed 10,000RPMMinimum Pad Speed 12,000RPMOperating Pressure 90Psi/6.3BARAir Consumption 12CFMAir Inlet 1/4” BSPVibration Level (a hd ) 9.59*m/s 2Noise Level 86dB(A)Weight 948gLength 225mmSafety InstructionsThese instructions are intended as a guide to the correct use of this equipment. The process ormaterials being sanded may have risk characteristics requiring additional safety measures andthese must be identified by the user. All users of this sander must be thoroughly acquainted withthis manual.Before Use and Before Using Tool for the First Time- Make sure you have the relevant Personal Protection Equipment (PPE).Hand ProtectionThe pad revolves at high speed and may cause damage if bought into contact withexposed flesh. The workpiece and the pad may also get hot after prolonged use. Handprotection must be strong enough to protect the skin and be a good fit and have no looseparts that may get caught in rotating parts.Determination of the test results includes consideration of measurementuncertainty from the test equipment and methods.*Uncertainty K: 1.44m/s2This model features centralvacuum dust extraction