Menu
Fast Forward EnergyCam USB Quick Start Manual
Also see for EnergyCam: Quick start guideGetting Started Tutorial
  |
Page 1 / 2FAST EnergyCam USBQuick Start Guide1 - How it worksEnergyCam USB reads mechanical meters such as electricity, gas and water meters and transmits meterreading data via USB.This guide gives you all the information you need to set up and run the device.2 - What’s in the box1) EnergyCam, wired type (Art. Nr. 1003)2) USB Communication Interface (Art. 1063)3) 3M VHB surface cleaning kit4) 3M adhesive pad5) Quick Start Guide (this document)3 - InstallationHow to install your EnergyCam USB:1 Install ECWin softwareDownload the latest ECWin build from our website:http://www.fastforward.ag/eng/download.Review the installed documentation which explains how to install and use your EnergyCam. Themanual can be opened by pressing the help button in ECWin.2 Connect EnergyCam to your PCTo connect your EnergyCam USB to a PC, use a Micro USB data cable (not included in this package).Maybe wait for the automatic installation of the device driver software.Then start the ECWin application and press the “AutoConnect” button. If the ECWin application is notable to connect – please check: Device Manager → Ports (COM & LPT) → USB Serial Port (COM ?)must be present. If not, go to chapter 3.a. of the manual and follow the installation instructions. |
Related manuals for Fast Forward EnergyCam
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved