31In the NEXHO application select from the menu “Security Systems” andpress the “Configuration” option. If you have not deactivated the passwordrequest, the configuration password will be, by default,“0000”.Select the option “Add new sensors” and select the type of sensor“Numeric”. Select the zone where you want to install the new sensor. If youstill have not created the zone, select the option “Create Zone” and name it.When the screen shows the “Waiting for the module” message, press theOK button in the module you want to install to turn it on, and press it againuntil you hear a bip and in the application screen you will see that it hasbeen correctly installedThe numeric module will now be ready to work in your automation system.WORKING WITH NUMERIC MODULESHow to install a numeric module in the automationnetworkThis operation will only be necessary when you are installingnumeric modules. This configuration will remain saved evenwith electric cut outs.It is necessary to go through this process in order to be able tocontrol your numeric modules from your internet module.
