Fanimation FP7958**-220 Owner's Manual

Contents

Fanimation FP7958**-220 Owner's Manual Manual pdf 3 page image

3Electrical and Structural RequirementsHow to Set Up Your Desk Fan▲WARNINGELECTRICAL REQUIREMENTSTable fan requires a grounded electrical supply line of220-240 volts AC, 50/60 Hz circuit. 1.6 m power cordincluded. Indoor, dry location use only.1. Carefully remove the fan from carton anddispose of packaging. Plug cord directly intoa suitable wall socket and turn on the powersupply. (Figure 1)2. Select the desired airflow, located on fan baseby rotating switch clockwise. (Figure 2)The switch speeds are as follows:0 = OFF1 = Low2 = Med3 = High3. Pull up on the oscillating knob for non-oscillatingoperation. Push down on the oscillating knob foroscillating operation. (Figure 3)4.Figure 3 Figure 4Figure 2Figure 1To avoid fire or shock, follow instructions carefully.Any electrical work not described in these instructionsshould only be completed by a licensed electrician.Turn the tilt angle adjusting knob on the fan’sneck anti-clockwise to loosen and hold the fanhead to adjust up and down to the desired tiltangle. Turn the tilt angle adjusting knobclockwise to tighten the fan head once yourfan is at the desired tilt angle. (Figure 4)