Fanco CFFCINI2LWH Installation And Operation Instruction Book

Contents

Fanco CFFCINI2LWH Installation And Operation Instruction Book Manual pdf 14 page image

REMOTE CONTROLLER INSTRUCTIONS12 Rev 3.0Fanco Infinity DC. All Rights Reserved.Install Battery:Open battery cover by pressing down and sliding the cover. Install two 1.5V (AAA) batteries(included) into the hand held remote transmitter battery compartment. (if not use for long periodof time, remove the batteries to prevent damage to the transmitter).SETID Code Pairing:Press the SET button and Number 4 button together for over 5 seconds to initiate the codelearning process between the handset and the receiver.NOTE: This button is only functional when press with number 4 button.F / RFan Reversing:Press this button on the remote controller handset to toggle between SUMMER and WINTERsettings. The fan should ideally be set to move blades in anticlockwise direction for downwardsairflow during summer seasons, and to move blades in clockwise direction for upwards airflowduring cooler seasons.Light ON/OFF:Press the button once to toggle the fan light to ON or OFF.By default, light is ON after power to the fan is turned ON.NOTE: This button is only functional on remote handset for ceiling fan equipped with light. Thebutton is NOT functional on remote handset for ceiling fan WITHOUT light.OFFFan OFF and SPEED CHANGE:Press the OFF button once to turn OFF the fan.By default, fan is OFF after power to the fan is turned ON.Press buttons with numbers (1, 2, 3, 4, 5, and 6) to turn ON the fan at the corresponding speedsetting. Speed 1 is the lowest speed. Lower fan speeds consume considerably less power thanhigher fan speeds. Operate ceiling fan at a lower speed to generate comfortable wind for arestful sleep.

/ 16

Related manuals for Fanco CFFCINI2LWH