Menu
Falltech 5073H User Instruction Manual
           |
Rev A 110826 MSRD45.1User Instruction ManualLocking Slide Bolt SRD ConnectorThis manual is intended to meet the Manufacturer's Instructions as required by the American National StandardsInstitute (ANSI) Z359 and should be used as part of an employee training program as required by the OccupationalSafety and Health Act (OSHA).WARNINGThis product is part of a personal fall arrest, restraint, work positioning, suspension, or rescue system. A Personal FallArrest System (PFAS) is typically composed of an anchorage and a Full Body Harness (FBH), with a connecting device,i.e., a Shock Absorbing Lanyard (SAL), or a Self-Retracting Device (SRD), attached to the dorsal D-ring of the FBH.These instructions must be provided to the worker using this equipment. The worker must read and understand themanufacturer's instructions for each component or part of the complete system. Manufacturer's instructions must befollowed for proper use, care, and maintenance of this product. These instructions must be retained and be keptavailable for the worker’s reference at all times. Alterations or misuse of this product, or failure to follow instructions,may result in serious injury or death.A Fall Protection Plan must be on file and available for review by all workers. It is the responsibility of the worker andthe purchaser of this equipment to assure that users of this equipment are properly trained in its use, maintenance,and storage. Training must be repeated at regular intervals. Training must not subject the trainee to fall hazards.Consult a doctor if there is reason to doubt your fitness to safely absorb the shock of a fall event. Age and fitnessseriously affect a worker’s ability to withstand falls. Pregnant women or minors must not use this equipment.ANSI limits the weight of fall protection equipment users to a maximum of 310 lbs. Products in this manual may have arated capacity exceeding ANSI capacity limits. Heavy users experience more risk of serious injury or death due to fallsbecause of increased fall arrest forces placed on the user's body. In addition, the onset of suspension trauma after a falleven may be accelerated for heavy users.The user of the equipment discussed in this manual must read and understand the entire manual before beginningwork.NOTE: For more information consult the ANSI Z359 body of standards.FallTech1306 South Alameda StreetCompton, CA 90221, USA1-800-719-46191-323-752-0066www.FallTech.com2016© |
Related manuals for Falltech 5073H
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved