OPERATING VOICERECOGNITIONWARNING!ALWAYS drive safely with your handson the wheel. You have full responsi-bility and assume all risks related tothe use of the Uconnect features andapplications in this vehicle. Only useUconnect when it is safe to do so.Failure to do so may result in anaccident involving serious injury ordeath.Introducing UconnectStart using Uconnect Voice Recognition withthese helpful quick tips. It provides the key VoiceCommands and tips you need to know to controlyour Uconnect 3 system. Key Features:• 5” touchscreen• Three buttons on either side of the displayHow To Activate Voice Commands1. Visit UconnectPhone.com to check mobiledevice and feature compatibility and to findphone pairing instructions.2. Reduce background noise. Wind and pas-senger conversations are examples of noisethat may impact recognition.3. Speak clearly at a normal pace and volumewhile facing straight ahead. The microphone ispositioned on the rearview mirror and aimed atthe driver.4. Each time you give a Voice Command, youmust first push either the VR or PHONE button,wait until after the beep, then say your VoiceCommand.5. You can interrupt the help message or sys-tem prompts by pushing the VR or PHONEbutton and saying a Voice Command from cur-rent category.All you need to control your Uconnect systemwith your voice are the buttons on your steeringwheel.1 — Push To Begin Radio Or Media Func-tions2 — Push To Initiate, Answer/End A PhoneCall, Send Or Receive A Text26