Epson powerlite 740c Quick Setup Manual

Also see for 740c - PowerLite XGA LCD Projector: Installation manual Technical brief User guide Parts list Quick setup guide

Contents

quick setup

1 Turn on your notebook.2 Remove the projector’s lens cover.3 Make sure the Power lightis orange and not flashing.4 Press the Power buttonto turn on the projector.STARTHERETurn on your equipmentConnect the projectorto your notebookPower cord VGA computer cableCAUTION: Before unplugging the projector...Shut down the projector properly:1. Press the Power button twice. Let the projector cool whilethe Power light flashes orange (about 30 seconds).2. Once the light stops flashing and the projector beeps, it’s safe tounplug the projector.Power buttonPower light1 Locate the required cables:2 Connect the computer cable tothe blue Computer/Component Videoport on the projector.3 Connect the other end to your notebook’s video-outor monitor port.NOTE: If your notebook has a DVI connector, you need to use anoptional DVI-to-VGA adapter with the included computer cable(see your computer’s documentation).4 Connect the power cord to theprojector, then plug the other endinto an electrical outlet.Epson®PowerLite®740cQuick Setup

/ 4

Related manuals for Epson 740c - PowerLite XGA LCD Projector