173• Do not carry the product by its control panel; this may damage the product.Note: Before storing your product for a long period, replace low, expended, or expired ink to helpprevent the print head from drying out. Store your product in a cool, dry place.1. Turn off the product.2. Wait for the power light to go out, then unplug the power cable.3. Disconnect any connected cables.4. Remove all the paper from the product.5. Close the output tray and paper support.6. Remove any memory card inserted in the product.7. Lift up the scanner unit and check to see if the print head is in the far right position (the homeposition). If not, turn on the product, wait for the print head to move, then turn the product off again.8. Secure the ink cartridge holder to the case with tape.Caution: Do not place tape on the white flat cable inside the product; otherwise, you may damageyour product.9. Lower the scanner unit.

Epson XP-340 User Manual

Product

Learn More

Legal