Start HereRead these instructions before using your product.Note for Spanish speakers/Nota para hispanohablantes:Para obtener instrucciones de configuración en español, consultela Guía de instalación en www.epson.com/support/wfm5799sp(requiere una conexión a Internet).Important Safety Instructions: When using telephone equipment, youshould always follow basic safety precautions to reduce the risk of fire,electric shock, and personal injury, including the following:• Do not use the Epson® product near water.• Always keep this guide handy.• Avoid using a telephone during an electrical storm. There may be aremote risk of electric shock from lightning.• Do not use a telephone to report a gas leak in the vicinity of the leak.Caution: To reduce the risk of fire, use only a No. 26 AWG or largertelecommunication line cord.1 UnpackFrench controlpanel stickersWarning: The product is heavy and should be lifted and moved bytwo people.1 Remove all protective materials from the product.2 Lift up the scanner unit and remove all protective materialsfrom inside the product, then close the scanner unit.3 Insert the output tray, then set it down gently.2 Turn on and configure1 Connect the power cord to the back of the product and toan electrical outlet.Caution: Do not connect to your computer yet.2 Turn on the product.3 Select your language, country, and time on the LCDscreen.Note: You can change these settings later using the product’scontrol panel. For more information, see the online User’s Guide.3 Install ink supply unit(ink pack)Note:• The product is designed for use with Epson ink packs only, notthird-party ink.• The ink pack included with the product is designed for productsetup and not for resale.• After some ink is used for charging, the rest is available for printing.Caution: Keep ink packs out of the reach of children and do not drinkthe ink.1 Unlock and open the ink pack tray cover, then remove thepacking material.WF-M5799