Epson WorkForce 840 Start Here Manual

Contents

epson technical support

Start HereRead these instructions before using your product.1 UnpackPower cordPhone cordCaution: Do not open ink cartridge packages until you are ready toinstall the ink. Cartridges are vacuum packed to maintain reliability.Remove all protective materials.Caution: Do not remove the plastic strip shown below. It is part of theAutomatic Document Feeder.2 Turn on1 Connect the power cable.Caution: Do not connect to your computer yet.2 Press the release bar underneath to raise the controlpanel. Then press the On button.To lower the control panel, press the release barunderneath.3 Select settings1 Select your language and country.Touch the screen to select the desired option. Pressor to see more countries.2 Select the current Daylight Saving Time setting (Winteror Summer).3 Select the date format.4 Use the numeric keypad to set the date, then press OK.5 Select 12h (AM/PM) or 24h (military time).6 Use the numeric keypad to set the time.7 Press OK when done.Note: You can change the date and time settings by selectingSetup from the Home menu, selecting Printer Setup, thenDate/Time. For more information on using and adjusting thecontrol panel, see your Quick Guide.4 Install ink cartridges1 Raise the scanner.2 Open the cartridge cover.*411974200**411974200*WorkForce®840 Series

/ 4

Related manuals for Epson C11CA97201