Epson Stylus Pro 4000 Start Here Manual

Also see for 4000 - Stylus Pro Color Inkjet Printer: Brochure & specs Product reference guide Product support bulletin Product information Product support bulletin

Contents

EPSON Stylus®Pro 4000Unpack1 Make sure you have all the parts shown below for your EPSON Stylus Pro 4000:Warning: The printer weighs about 85 pounds, and should be lifted by two people.2 Remove all the packing materials andtape. Save the box and packaging in caseyou need to ship the printer.3 Loosen the two screws and remove thecarriage retainer bracket.4 Unlock the print head carriage bypulling the green tab to the left. Donot remove the tab.Note: To lock the print head carriagefor transportation, push the green tab tothe right.Set Up and Plug In1 Connect the power cord to the ACinlet on the back of the printer.2 Plug the other end of the powercord into a properly groundedelectrical outlet.3 Attach the exhaust port cover by sliding italong the slots on the back of the printer.4 Insert the paper tray into the slots atthe front of the printer.Paper trayPrinterInk cartridgesPower cordRoll paper spindle Spindle adapters(attached to spindle)Start HereStart HereAC inletExhaust port cover