Epson Stylus Pro 3880 Network Manual

Also see for 3880 - Stylus Pro Color Inkjet Printer: Brochure Specifications Brochure & specs User guide Start here

Setting Up Your System for Network Printing 1913. Press u or d to change each octet value, then press r to select the nextoctet. When you have changed the value of the last octet, press andthen press the + Cancel/Reset button to exit the printer menu.14. Turn the printer off then back on again.c Caution:After turning off the printer, wait until the status lights go off before turning itback on; otherwise the network interface may not work correctly.15. See “Printing a Network Status Sheet” below to print a network statussheet and confirm the new IP address. For Windows, you’ll need the IPaddress during setup. You can also use the EpsonNet Config software toobtain the IP address.Now you can install the printer software (see “Installing the Printer Software”on page 20).Printing a Network Status Sheet1. Make sure that the printer is not printing and the LCD displays READY.2. Load three sheets of Letter-size paper.3. Press the Menu r button on the printer’s control panel to enter the printer’smenu system.4. Press d to highlight TEST PRINT, then press r.5. Press d to highlight NETWORK STATUS SHEET, then press r.6. Press to print the network status sheet.