Epson Stylus PHOTO 890 Service Manual

Also see for 1280 - Stylus Photo Color Inkjet Printer: Cartridges Replacement Printer basics Product support bulletin Product support bulletin Supplementary guide

Contents

EPSON Stylus Photo 890/1280/1290 Revision CADJUSTMENT Individual Adjustment Program 1365. When you adjust the setting values, make sure that the Bi-D gap becomes less than60 μ m.Figure 5-29. Bi-D Adjustment Printing Example6. After changing the values, click OK. The following message appears on thewindow and the Input Bi-D Adjustment Value is completed.Figure 5-30. Input Bi-D Adjustment Value Completed7. To continue with other mode, click Previous and select a different item. Print theBi-D Adjustment Patterns if necessary.8. Repeat the steps from 1 to 7 until you get the best result.9. To exit or continue the program, click Quit on the lower left. Refer to Figure5-17.“Exit Window” on page -131.5.3.2.2 Check Present Adjustment Data1. Start the program and input all the required information on the initial window.Then the main menu appears on the screen. (See 5.2.4.1“Adjusting Program InitialSetting” on page -128)2. Select Bi-D from the main menu.3. The Bi-Directional Adjustment window appears. Select Check PresentAdjustment Data and click OK.Figure 5-31. Bi-Directional Adjustment WindowBi-dMS Colordata = -14 Bi-D GapLess than 60 μm