Managing Print Jobs and Network Printing4-108. You see the address and name of the printer in the Port list.Click OK to exit printer properties.Now you can print to the remote printer. Repeat these steps foreach system on the network that needs to access the printer.Connecting to the Printer onWindows NT 3.51 SystemsIf you installed an optional network interface card in yourprinter and installed the printer software as described in theQuick Setup booklet, follow the steps below to connect theremote printer to each system on the network using the TCP/IP(or LPR) protocol.1. Follow the instructions to install the LPR software andconfigure the interface card in the manual that came withthe card.2. To configure the printer for TCP/IP (or LPR) printing,double-click the Print Manager icon in the Main programgroup.3. Select the EPSON Stylus COLOR 1520 window.4. Choose Properties in the Printer menu.5. Select Other in the Print to list.6. Select LPR Port in the Available Print Monitors list andclick OK.7. Type the IP address of the card in the first box and typea short name for the printer in the second box. Thenclick OK.8. Click OK again, then exit Print Manager.Now you can print to the remote printer. Repeat these steps foreach system on the network that needs to access the printer.Note:If you connected theprinter directly to aWindows NT server oryou’re using a differentnetwork protocol, seeyour Windows NTdocumentation forinstructions onconfiguring your printerfor the network. If you’reusing an optionalinterface card, also seethe documentation thatcame with the card.If you’ve connected theprinter to a server, besure to install theWindows NT 3.51software on allworkstations that willshare the printer overthe network.
