169Maintaining and Transporting the Printer | 1697. Lift the printer using the hand grips where provided. (See the stickerslocated near the rear hand grips for the correct holding position.)8. Keep the printer level while moving it. See page 170 for informationabout setting up the printer after transporting it.To ship the printer a longer distance, you should repack it using the originalbox and packing materials. If you don’t have the original packaging, you canpurchase replacement packaging from Epson. See page 12 for moreinformation.Moving the Printer on the StandWhen you need to move the printer a short distance, such as within the samebuilding, you can roll the printer on its casters.1. Make sure the printer is turned off and the carriage is in the homeposition (on the far right). If not, turn the printer back on, wait until thecarriage moves to the home position, then turn off the printer.2. Disconnect the power cord and interface cable.3. Remove any paper and close the roll paper cover. Make sure the frontcover is closed.4. Store the paper basket as described on page 80.WARNING: The printer isvery heavy. Make sure youhave four people lift it.Caution: Do not roll theprinter on angled oruneven surfaces.
