16Setting up your SF-510/SF-7103 When charging is complete, hold the cradle and press the product down into the lower part of the cradle torelease product.Initial SettingsAfter charging the product for the first time andremoving it from the cradle, follow the on-screeninstructions to select the initial settings.1 Follow the on-screen instructions to set thelanguage; unit format; your height, weight,DOB, and gender; today’s date; and the dateformat.Press C or D to highlight an option, then press Ato select it.2 Go to a location outside that isn’t surrounded bytall buildings with no obstructions overhead.3 Press C or D to highlight Yes, then press A tostart GPS synchronization.A signal is received from the GPS and the time isautomatically synchronized.When Complete is displayed, press A.The Time screen is displayed.c Important:The time is automatically detected via GPS. GPSsignals cannot be received indoors. Make sure theinitial GPS synchronization is performedoutdoors.

Epson SF-510 User Manual

What you can do with this smartphone APP

Preparation

Install the Run Connect app to your iPhone

account

Configuring the account

Enabling Bluetooth on your iPhone

Pair the RUNSENSE device with your iPhone

Uploading and Checking

Uploading Measurement Data

Checking Uploaded Measurement Data

Entering Weight and Body Fat

Changing the Settings

Settings

List of Settings

Advanced Settings (SF710 Only)

Setting the AT Lap Function

Setting the Target Pace Function

Setting the Waypoint Function

Setting the Interval Function

Reducing the GPS Positioning Time (AGPS)

Troubleshooting

Problem Solving

Unpairing Devices

Operations on the Product

Contacting us About this Product

SF-510

Features

Symbols in this Manual

Notes on Usage

About the Cradle

Optional HR Monitor

U "Educating Your Stride Sensor" on

Checking the Items Provided

Basic Operations

Function of each button

Charging

Initial Settings

About the Battery

Specifying a GPS (GPS Positioning)

GPS Positioning

Making Precise Measurements

Educating Your Stride Sensor

Measurable items

What is the chronograph function

Measuring

Screen Display

Setting a Time and Distance for Hard and Light Workouts(Interval Function)

Setting Interval Conditions and Measuring

been Set

Measure until the time or distance set in advance is reached (Goal function)

Measuring by Setting the Time or Distance

Checking Measurement Data

Preparing to Measure Heart Rate

Registering the HR Monitor to the Device

Enabling the HR Monitor

Measuring Heart Rate

Replacing the Battery for the HR Monitor

Data Management Using the Web

What is the Web Application (NeoRun)

Installing the NR Uploader

Making Settings

Mes. Settings

Mes. Settings Table

Settings Table

Screen

Screen Pattern Table

Measurement Display Items Table

Changing the Measurement Screen

Changing the Lap

Setting Examples

Maintenance

Performing Maintenance

Replacing the Battery

Updating the Firmware

Caution

Resetting the System

After Service

Appendix

Understanding the Icons

Product Specifications

Cradle specifications

Glossary

Optional heart rate monitor

Alarm (tones/vibration)

About the battery

GPS positioning

Indoor mode (SF-710/SF-510 only)

Making precise measurements

Measurable Items

Screen display

Setting a Time and Distance for Hard and Light Workouts (Interval Function)

Setting interval conditions and measuring

been set

Measure until the Time or Distance Set in Advance Is Reached (Goal Function)

Measuring by setting the time or distance

Registering waypoints

Specifying and measuring waypoints

Delete unnecessary measurement data

Enabling the heart rate monitor

Disabling the Heart Rate Monitor

data management using the web application

Installing Run Connect (Uploader Software)

Setting Measurements Using the PC Application (Run Connect) (SF

What is the PC Application (Run Connect)

Setting the AT Lap Function (SF-710 only)

Setting the target pace

Setting the Waypoint Function (SF-710 only)

Setting the Interval Function (SF-710 only)

Measure set

Measure set. table

Settings table

Screen pattern table

Measurement display abbreviations

Changing the measurement screen

Changing the Lap screen

Setting examples

Looking after your device

Monitor

After-sales Service

SF-710

Epson SF-510 User Manual

Product

Learn More

Legal