Epson PriorityFAX 3000 Product Support Bulletin

Also see for PriorityFAX 3000: Specifications Owner's manual

EPSONEPSON AMERICA, INC. INFORMATIONProduct Support BulletinSubject: PriorityFax 2000/3000 Maintenance Switch Function TablesDate: 8/8/90 PSB No: P-0070Page: 1 of 8 Originator: VBThe purpose of this document is to describe the PriorityFax 2000/3000maintenance soft switch functions and supply instructions for accessing them.ACCESSING THE MAINTENANCE MODE1. In normal operation mode without a document inserted, press“FUNCTION l 2 8 6 4” in the following sequence.A. Press “FUNCTION” then immediately press “*“.B. The unit will beep 3 times.C. Immediately following the 3 beeps, press ’ 2 8 6 4 “.NOTE: Numbers must be pressed in rapid succession.2. The unit will emit one long beep and the LCD will display“MAINTENANCE”, indicating it is in maintenance mode.If the LCD does not display ‘MAINTENANCE”, press “STOP”, wait forthe LCD to display the date and time, then try step 1 again. CallEpson Product Support at 213-539-9955 if assistance is required.3. There are 2 levels of soft switch functions accessible in themaintenance mode. Table 1 lists the initial level functions. Tables 2,3, and 4 list the second level functions. The tables are located at theend of this document.4. To activate one of the functions listed in Tab 1, enter the initialmaintenance mode. Enter the two digit ‘Switch Number” with the keyson the control panel. The unit will perform the function and return tothe initial maintenance mode.The functions marked ‘NOT USED’ are either not available or requireSpecialized equipment. They should only be accessed by anauthorized Epson Customer Care Center.