Menu
Epson PowerLite Presenter User Manual
Also see for PowerLite Presenter L: User guideDeclaration of conformityParts listInstall guideBrochure
                                                                              | |
Contents
|
Problem Solving 65The picture looks too light or too dark.■ Press the button on the remote control to select the best setting for your viewingenvironment. See page 27.■ Adjust the Brightness and Contrast settings. See page 49.■ If the picture looks darker than it used to, you may need to replace the lamp. See page 56.The colors on the screen don’t look right.■ Press the button on the remote control to select the best setting for your viewingenvironment.■ Adjust the Color Saturation or Tint settings. See page 49.■ If you’re using external video equipment, check the solutions on page 66.The picture is wider at the top or bottom.■ You’ve tilted the projector to raise or lower the image, causing it to become “keystoned.”Use the or buttons on the remote control or the Signal menu (see page 51)tocorrect the problem.The picture is taller on the left or right side.The projector is set at an angle to the screen. Face it squarely toward the screen.There is no sound, or the sound is not loud enough.■ Try pressing the + Volume button on the projector or on the remote control.■ Press the button on the remote control to make sure the sound hasn’t been turnedoff temporarily.■ If you’re using external video equipment with a component or composite videoconnection, make sure you connected the red and white audio jacks to the projector’saudio ports (see page 30).■ If you’re using external equipment, you may need to adjust the Audio settings in thesetup menu (see page 50). |
Related manuals for Epson PowerLite Presenter L
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved