32 Using Your Projector with Other EquipmentAfter you connect your equipment to the projector, follow these steps to begin:1. Make sure all of the equipment is plugged into a power source.2. Open the lens cover and press the button on the projector or the on the remotecontrol.3. Press the button on the projector or the button on the remote control.4. When you see the menu, use the down-arrow or up-arrow button to select the correctsource (if necessary), then press the button on the projector or the button on theremote control.■ If you used the HDMI connection, select HDMI.■ If you used the component video connection, select Component.■ Otherwise, select Video.5. Turn on the power to the connected video equipment, then start playing the video orgame.6. Normally, your projector selects the correct aspect ratio automatically. If you need tochange the aspect, press the button on the remote control and select Normal, Full,or Zoom (if available for the video source you’re using).LOutputRAudioWhiteRedComponent Video ConnectionRCA stereoaudio cableComponent video cableFor connecting a cable or satellite TV receiver, DVD player, DVR, or game console.
